After some more time running, outside passenger train is also greatly reduced and with full load, no more queue too

works great, I did have issue where if I put outside connects at the recommended three instead of default 2. with the three I noticed that incoming transport train and intercity buses became super heavy with min passengers. My intercity bus station also created hundreds of empty buses leaving as well. At the 2, intercity bus arrival is extremely rare and the incoming transport trains come in batches of 4 or 5 full trains.

The mod still works well (train, ship and plane)
Mainly use it for tackling train issue.
For now amount of cargo train is greatly reduced which is super great.
Amount of outside train is also reduced but not as effective as cargo one.
They still need to queue to get into the station but will no longer stuck everything.

For those that get this to work great for you. Doesn't work for me. Most cargo trains run 5, 7, 13% full at the recommended setting of 4X. Set it to 9x nothing changed and say I did a full restart after changing the setting. Cargo trains still run almost empty. If they were 50% I'd have no train at all. But with most going 13% or less they backup off the map. After all these years trains are still broken in this game. Well not broken but horribly coded. No Cargo train in the world is running down the train 5% full 99% of the time. The rail company would go broke.

This mod doesn't solve the issue where intercity trains spawn in my station each one by one, but it does work for outside connections only.. rip

Still works and reduces the numbers of freight trains to a realistic level.

Can someone confirm that this mod just works as of now?

@TsukiRunsu it works, the mod just increase wait time, nothing else

Does this mod still work? Sick of the fact that my cruise ships only have 3 people in it.

I'm also seeing NO intercity buses as others have commented, but passenger/cargo trains seem to work fine for me with this mod enabled.

Has anyone else encountered the problem that intercity trains don't spawn?

the same issue - no intercity buses

this mod was not allowing intercity buses to spawn. Once I un-subscribed to it they spawned

All of my buildings became invisible when enabling this mod.

problem with other mods like tm:pe-test possible (me having too many or none outside trains), tba

Is it possible to just simply reduce the number of dumby traffic rather then outright removing them?

I don't know if it's this mod that causes the problem but there are no intercity trains spawning in my city. The train stations are set to allow them but there are none.

i don't know if it is this mod causing this - but no trains are spawning at outside connections, and upon deleting the tracks the pedestrians waiting do not despawn

I left a msg in the "Everyone's thoughts on traffic in version 1.14?" thread, but I'm not entirely sure this mod if being updated or cared for anymore. Couldn't find any alternative mod, maybe someone can suggest another option? Cheers.

It appears this mod doesn't play friendly with other mods and in my case specifically outside train connections, very sad to see but oh well

Pretty much the same here Moyo

I'm having a little problem with the cargo ship delay.
I have far too many cargo ships arriving in my ports and they're only half-full. Even if I set the delay to x10, it reduces the number of cargo ships, but not enough. Is there a way of solving this problem?
Edit : I disabled dummy traffic but no change.

good

i have a problem with passenger ships coming to all kind of ports and queuing (over 30 easily) and more keep spawning. City is being flooded by tourists (yay?)

well, i Guess the good times are over with CS1... no way community will be updating mods since CS2 is out. THanks for maintaining nevertheless, it was fun... :)

P.S. OH, and thank you CO, for totally ready and playable vanilla version of this game :'D

same here

I had to unsubscribe this mod. My whole city was dying coz of no cargo trains, ships and planes.

can't seem to enable the mod. nothing happens.

Hi, will this mod work with Transfer Manager CE?

That could be the issue, qstar.inc. I'd need to see your input_log.txt file; sending via Discord is best but you could upload it anywhere. Make sure to do this immediately after seeing errors.

Whenever I enable this mod and start the simulation, I get bombarded with Exceptions.
I have Transfer Manager CE, the only one I think is relevant to this. Any ideas?

This probably helps some people. However, The problem is actually that the external conection works like a regular station and doesnt just delete the oncomig trains fast enough to deal with demand.

The only way i could imagine, is to limit yourself to not have to many intercity connected cargo stations. because if the number of such stations exceeds the number of external connections and thus produce more trains than can be removed by the border stations, you will inevitably end up with a traffic jam.

@Toaster Bath - the outside rail connections are basically train stations. If you have 81 tiles and some kind of fog remover, you can bring train stops to the connection. I have in all of my cities.

@notDONEyet this mod is working just fine. You can slow down the vehicles turning back at the edge. That's all.

it looks like its not working anymore :( :(

As far as I can see, and knowing that I have no mod affecting outside connections, what I can say is that I see no differences with/without this mod.

I believe this mod works on its own, but there is likely to be compatibility issues with other mods that affect outside connections.

--RIP-- Mod may be broken, but never forgotten... --RIP--

not working, too many useless trains. It was a great mod. F

edit: it seems to be an issue with the game itself and not from this mod

passenger trains failing to spawn at outside connections causing massive blockages. When clicking on TMPE lane connector, the white circle on the middle of the edge segment can either be at weird position or twined somehow, or absent (one circle per track so there should be 2 at each last segment). I will unsub for now and checking for updates of this mod

解决货车轮船不满就出口的问题

My outside connections are spawning pedestrians and is seeming to treat railways as a train station, causing backups throughout my city rail system. The networks connected to them also are causing it to clip with the map. I'm unsure if it's from this mod but im starting here because it's the one that makes the most sense.

Getting nearly empty passenger trains again, any fixes?

Helped me a lot

@deup: That was the fix and the issue. This mod is fine, it specifically warns not to use the dummy traffic function in this mod if another mod has the function, and Transfer Manager CE has the function, and I use that mod. So, problem solved. :)

Its strange, on my side its an other effect : even if dummy traffic isnt checked, there is no dummy traffic in my city.
Maybe i will try something : play with the mod and check dummy boxes, maybe its bugged and it is disable when you uncheck !
For now, I disable the mod and my dummy traffic is back

@Maarten I've also noticed it when starting a new city. Instead, you can try using the option to disable dummy traffic included in the Transfer Manager CE mod.

I am noticing disable dummy traffic is not working in my city. Now, I recently re-installed Windows and CS1 from scratch, and re-evaluated all mods, made some changes here and there....so it is very possible another mod is the culprit here - but what other mods affect dummy traffic or has a dummy traffic setting?

Passenger trains are not showing up in my city. I only have truck dummy traffic disabled for this mod.

Is this mod in some way messing with the outside trains? If I make a station at the entrance point and set up an internal rail line, the outside trains will start popping up, driving to the station (sliding is more like it) and all passengers following after, then just disappearing after a few seconds. Without that station, no trains, at all, as in ever.