Please direct all issues with the Seismic Surveying mod to that workshop page.

Little white ones like keen use. But I think that requirement was replaced with the cockpit forward.

"Make sure to build gear with arrows pointing forward!"

What arrows?

This is the perfect place. I'll check it out and shave off a section

I'm not sure if this is the right spot to report, but on the small ship model the collision box doesn't seem to be *quite* flush and so if you try to make a piston-retractable seismic gear it summons clang. Weirdly it works in *some* configurations? It makes me think maybe there's a taper in the collision box which causes it to not collide near the detector, but it *does* at the other end?

The landing gear doesn't have this issue so it is at least this collider.

This is an add-on the Seismic Surveying mod is where you need to communicate

Some my other mods replace ice with a new ore called "StoneIce", which results in this mod cannot filter out those "StoneIce".
Is it possible to make the filter list dynamic? Like, users can set their filter list on some textbox, or choose from a dropdown.

It pulls this model as a dependency. Allows me to update the art without effecting the mod.
You could also override this mod with another and have a custom version without needing to copy any code

I don't quite understand. Doesn't Seismic Surveying already come with a survey landing gear? Or is this one different? They look the same to me.

It seems to work fine for me on a subgrid. I planted a thumper on my station and hooked it to the ground with a piston and it's giving me readings. However I don't know what direction to look for ores since I have it placed on an LCD outside of a cockpit

If that's a limitation it would have to be addressed on the script side

This doesn't seem to work on a sub-grid. I'd like to use a piston to lower it to the ground from a large wheeled vehicle. Am I doing something wrong? If not, any chance you might add this capability?

Same direction as the cockpit

What does "forward" mean? Same direction as the cockpit, same direction as the remote control, or just the direction that you want to be "up" on the LCD?

It's literally just a landing gear block, and many others have no issues with the scripting framework on multiplayer. I suggest you need to look deeper. Especially if you're running a torch server with plugins

i got them

{LINKKI POISTETTU}https://drive.google.com/file/d/1pCjq6S1k14bh-SFEdyLZLC9eZMoj827H/view?usp=sharing

i cant find any log now, but this block is SUPER bugged on dedicated servers, desync, autolock bugged and teleports are constantly with this block on ships.

Yes all the logs from everyone effected and the server. If it's intermittent that will be hard to trace without that key information.

If you jump on Draygo's discord it could be easier to report the bugs

Provide a crash log please.

Placing or grinding this block on Dedicated Server, cause crashes on players around it, not always but 80% of the times

Orientation of the gear shouldn't matter for the display. The only thing that would control is the initial position of the pie slice for the detailed scan.

Should be two white triangles on the base plate

"Make sure to build gear with arrows pointing forward!"

I dont see any arrows !! Help !!

This looks like an ore detector with extra steps.....

It's unreal help to find a ores on big area! Thank for this! Now i can not walking without objective for find a place for new mine.

Are there any plans on expanding functionality of this mod ?
Possibility of changing scale of radar scaner screen on LCD with info about the scale (aka Radius/Diameter 500m etc. ).
I'm playing with AQD Vanila Ores Distribution mod (which sends some ores quiet deep) and have problems locating Cobalt on Pertam :P (maybe I'm only noob...)

Hopefully fixed.

I see what might be the problem dyiie, ill try to patch it in the next few hours.

That's a problem for the parent mod, the log shows your planet as not existing yet so the scripting crashed

Hi, i have encountered repeating crashes of my client after about one minute after joining the server. It was following my approach to mildly populated moon. log ling on google drive [drive.google.com]

gotcha, will do

Best ask on the other mod where the functions come from. It's likely you cannot trigger from a timer

tried to set a timer to repeatedly trigger the 'right 5' command so that I could have the landing gear piece just constantly sweep (with delay to allow for the lcd refresh), but nothing seems to happen. Do timers not work to trigger it for some reason?

The fronts of the blocks are marked with arrows like keen has on the remote control

This is odd... Every time I approach a mark on the scanner, land, and re-scan, the original mark disappears. Is there something going on here that I'm not understanding, like a minimum range, or something?

The dots on the LCD are already oriented for you, the seismic block rotation does not matter. if you are looking at the LCD the dots on the top of the LCD will be in the forward direction.

"World oriented"?
Is the top of the LCD "forward" on the sensor? Does it point to some "galactic north"? I'm not sure what "world oriented" means.

the LCD should be world oriented.

I have a quick question re: the system.
Would it be possible to mark a "forward" on the block and the LCD display so that the user can easily orient themselves to find the ores displayed on the screen?
(Which side is "forward" on the landing gear seismic sensor? And which cardinal direction on the LCD is that?)

No, if we do that it will not work for people who only add one of the mods.

It actually doesnt matter if they reference each other.

ok so BOTH this page says it requires the other so WHICH ONE is the requirement & witch one is the Dependent? cause if this ones a dependent please remove it from the other & instead make a dependant mods section in the description to advertise such mods.

normally high....but i just checked and everything is set to default of medium. settings probably got wiped by a patch or something.

Just a quick question, what model graphics settings do you use?

I seem to be unable to build them - it's on the g menu, but if i add it to my toolbar, and press that toolbar button, nothing happens.

@Typhon Plume you can also press R to change sizes

It might be mod corruption: you can try deleting the following folder Steam\steamapps\workshop\content\244850\2819263781 which should force this mod to be redownloaded.

For some reason I'm not seeing or getting the small grid version to show up or place, even when hitting the number a few times to change between large and small grid on the hotbar. I'm going to still work at it, as there might be something going on, on my end but if it's not thought you might like to know.

@Chipstix213 The gear is the G menu now.

🤔 Bigfoot sounds about right here...

No problem bigfoot!